WHY ENGRAVING SOLUTIONS?

Engraving Solutions is the exclusive distributor of Epilog laser systems in Florida, Georgia and Eastern Tennessee. We have two offices, one located in Gainesville, GA, the other conveniently located in North Orlando, FL.

FLORIDA OFFICE
GEORGIA OFFICE

The Helix 24 is the most versatile and most popular system in Epilog's Legend Series, the Helix 24 provides an 24" x 18" work area, but with faster speeds and high-quality engraving.

Epilog Laser Helix laser engraver machine

Helix Laser Product Info

The Legend Series Helix features Epilog's high performance CO2 laser systems and is utilized by customers for the highest-quality engraving and cutting of wood, acrylics, plastics, stone, and much more.

For engravers looking to work with large engraving pieces, the Epilog Helix is an ideal choice. The Helix's generous 24" x 18" x 8.5" (610 x 457 x 215.9 mm) engraving area will allow you to engrave multiple pieces as well as thicker materials, including boxes and vases.

Epilog Laser systems are 100% designed, engineered and built in the USA!

Feature Highlights

Designed with features that work together to provide you with great engraving and cutting quality and an economical price.
Full list of features can be found on the Legend Laser Series features page.

Accupoint™ Motion Control System
Legend accupoint motion control for the laser

The motion control provide higher detail engraving, even at the fastest speeds.

Accupoint™ High Speed Servo Motors
Legend Laser servo motors

Known for their incredibly fast acceleration/deceleration and faster turnaround speeds on each engraved line.

Accupoint™ Linear Encoders
Linear Encoders

Synchronizes the firing of the laser at incredibly small increments of .02 mm.

Long-Life Lenses Rated to 500 Watts
Legend Mini Helix Lenses

Lenses that are rated to an incredibly high 500 watts and can last the life of the laser system.

Long-Life Steel Bearings
Mini and Helix Bearings System

Designed to last the life of the system without the inevitable wobble and replacement of plastic bearings.

Radiance™ Higher Resolution Optics
Mini Helix Radiance Optics

No additional, expensive lens package needed for the highest resolution engraving (Mini 24/Helix).

Laser Dashboard™ Printer Driver
Zing print driver

User-friendly print driver allows you to control all of the laser's features from one interface.

True Ethernet Networking Capabilities
zing laser networking

All Epilog Zing laser systems come standard with a high-speed, 10 Base T-Ethernet connection as well as USB.

CO2 Waveguide Laser Tubes by Epilog
zing laser tube

All-metal tube design provides higher beam quality and longer life with low recharge costs.

Mini Helix cutting table
Integrated Cutting Table

Included with each Legend System, the Vector Cutting Table provides better cutting quality.

Memory in the Machine
Mini Helix Memory

Improve job management and protect data integrity with 64MB of RAM in every system.

Optional Accessories

Designed with features that work together to provide you with great engraving and cutting quality and an economical price.

Legend Rotary Attachment

Rotary Attachments for Cylindrical Items

The Rotary Attachment allows you to engrave wine bottles, mugs, glasses, flashlights and more.

Available for all Epilog Legend systems, the Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, and other cylindrical items.

Specially designed for our entire line of Legend lasers, it has been built to accommodate a large variety of shapes and sizes. The attachment easily adjusts for different lengths and will even rotate cylinders that have different diameters on each end.

So intuitive and easy to use, you can change from one glass to the next in seconds without removing the attachment from the engraver. Additionally, our proprietary design provides accurate image scaling without the need to input diameter or circumference calculations.

PhotoLaser Plus Software

PhotoLaser Plus Software

Photo processing software that optimizes your photographs for engraving on a variety of materials.

PhotoLaser Plus takes photo engraving with your Epilog Legend Starter Series laser to the next level by easily processing photos for engraving on all types of materials.

Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers?

Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.



Legend Vector Cutting Grid

Optional Lenses

In addition to the 2.0" lens, we offer special lenses for specific applications.

1.5" Lens: Highest-Resolution Engraving
Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts.

4.0" Lens: Cutting Thicker Materials and Inside Deep Areas
The 4.0 inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.

Legend Vector Cutting Grid

Vector Pin Table

Raise and support your cutting materials for better edge quality.

The Pin Table incorporates movable pins that can be placed anywhere along the table's grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.

Legend Air Compressor

Air Compressor

Blows a constant stream of air on the cutting area.

Epilog's optional Air Compressor is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.

This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

Epilog Helix Technical specifications

Epilog Helix
Engraving Area 24" x 18" (610 x 457 mm)
Maximum Material Thickness 8.5" (216 mm)
Maximum Material Thickness with Table Removed 11" (279 mm) 23.5" x 17" (597 x 432 mm) engraving area.
Laser Wattage 30, 40, 50, 60, or 75 watts
Laser Source State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory Capacity Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
Air Assist Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on Epilog's Legend Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Legend Series Lasers.
Operating Modes Optimized raster, vector or combined modes.
Motion Control System High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology for precise positioning.
X-Axis Bearings Ground and polished stainless steel NeverWear Bearing System.
Belts Advanced B-style Kevlar Belts.
Resolution User controlled from 75 to 1200 dpi.
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8.
Size (W x D x H) 36.5" x 32" x 39.8" (927 x 813 x 1011 mm)
Weight 180 lbs (82 kg)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table Weight The Helix 24 has a static table weight of 70 lbs (32 kg) and a lifting table weight of 30 lbs (14 kg).
Normal Sound Level 62 db
Ventilation System 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter.

Engraving Solutions – Laser engraving and cutting system sales in Florida, Georgia and Eastern Tennessee.

Let's us help you with your laser machine needs.